Questions & Answers for: Kia Sportage top mark

...mark ( top dead center), install the timing belt on this gear first then secure it with a piece of hose or anything that fits in between housing and belt to secure belt from moving from gear) then ...

top. The camshaft pully marking at TDC. take off # 1 sparkplug and mark the distributor( if it has one,) to the numer one wire where the spark plug wire connects and mark the distributor cap where the

...top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support. You will have vertical adjustment screws for each independent beam (separate highs and ...

...crank pully is rounded off. SOHC engines have an arrow on cam pully that aligns with a point at top of timing belt rear housing. about straight up at top of it. DOHC have an I and an E on the cam ...

You can purhase or rent a tool to do this. If you don't hold the cams in place they will move when the belt tension is released. Always set the crank to top dead center and mark all gears just in case

top with the mark on the cover, as the camshaft pully to the right with the E should also be at the top aligned with the mark on the cover, and the crank should have its mark also at the top ( the cut

...on the bottom crank pulley align the mark at the back of the pulley also to the top where the mark is on the engine..i have a diagram if needed if this is single ohc email ...

...the mark at the back of the pulley also to the top where the mark is on the engine..i have a diagram if needed if this is single ohc i have a diagram if you prefer. email ...

...the top dead center mark on the crank but each cam pulley has a E, I, and S mark. how do you set the overhead pulleys? left is intake. I should be 12 o'clock right is exhaust. E should be 12 ...

...top dead center). The timing marks are located on the crank shaft pulley with a pointer on the engine case.Connect the timing light spark plug on to the number one spark plug and connect the power ...