Questions & Answers for: GE SpaceMaker top of door broke

top screw and removed the trim on the inside of the door. I can see the other screw that I need to remove, but I can't get it to move at all. This is where the handle broke. What am I doing wrong? You

...door handle broke. The top of the handle is no longer attached. I tried that super putty stuff they advertise on TV that is supposed to bond to anything and it did not work. I can't find the ...

...door, top end out into empty space, and pull it into place on the screw head, rotate the handle top over the door and screw it into place, dont flex the handle much to twist it in place, they are ...

top of the microwave (2 screws) and lift it off. The door then lifts up easily, off its mounting. The first step in disassembling the door was to pop out the plastic bezel that surrounds the window on

...pry out the plastic strip that surrounds the window on the inside of the door to reach the top screw that holds on the handle. Be prepared to spend a pretty penny on the replacement handle as

...top screw to handle cant get to the bottom screw Normally you have to separate the door panels (as shown in the attached photo) and then you'll see the previously hidden screws you need to remove. ...

door, around the glass there is a plastic seal that the latches run through this piece will pop off .Take a butter knife starting at the top right slide it into and the move the knife to the left.This

...top of the door, when it is open. Bottom of handle is also held on by a screw, which is behind the trim. Do not know how to remove the trim to have access to the screw. Normally you have to separate ...

solid. no movement. How do I get access to that top door handle screw? Thank you Mike Mike, Found the diagram HERE and HERE and also has a parts listing you can order. Hope this helps with you project