...top and bottom threads, changed needles, cleaned out the bobbin case and it does not help. it sounds like no bobbin thread tension. there should be some resistance when you pull on the bobbin thread. ...
Question about 6019QC Mechanical Sewing Machine
...top The bottom tension is too loose. If your bobbin is in a case there is a little screw on the side that will tighten the plates and increase the tension. Test your thread coming out of the case as ...
...top of the bobbin case and inserting it into the well. The small arm sticking out on the side of the case fits into a slot on the well. Make sure the bobbin is engaged in the proper position before ...
Question about Sewist 525S Mechanical Sewing Machine
...case. If this is a rotary bobbin (side or front loaded) and not a drop-in (top loaded), you can test the bobbin tension after putting it into the bobbin case. Take hold of the end of the thread, and ...
Question about D'cor Excel Pro 5124 Mechanical Sewing Machine
...4.Bobbin thread slipped from under====check threading of tension===============================bobbin case 5.Lint or thread in top tension=======clean between tension discs Thank you and good
Question about D'cor Excel Pro 5124 Mechanical Sewing Machine
...top tension is on 0 I suspect the problem begins in the bobbin, make sure first of all the bobbin is turning anti clockwise in the bobbin case, when you pull the thread through the bobbin case there ...
...case is correctly in the machine,, if it's a top loading bobbin you may need to have the bobbin case checked to see if it's damaged or see if the hook and hook race has a problem 8. Also could be a ...
Question about D'cor Excel Pro 5124 Mechanical Sewing Machine
...case is correctly in the machine,, if it's a top loading bobbin you may need to have the bobbin case checked to see if it's damaged or see if the hook and hook race has a problem 8. Also could be a ...
Question about D'cor Excel Pro 5124 Mechanical Sewing Machine
...on the thread is. You have now changed your bobbin. With the plastic plate still off, hold the top thread with your left hand and with your right slowly turn the wheel, this will send the needle
Question about D'cor Excel Pro 5124 Mechanical Sewing Machine
...has been tightened specifically for quilting. For other sewing projects using a standard thread weight, I use a bobbin case that is factory set and then adjust the top thread tension for each
Usually answered in minutes!
565 Questions
193 Questions
102 Questions
90 Questions
79 Questions