Questions & Answers for: top 5 microprocessor

...5 SPECIFICATIONS PINS PIN LAYOUT VOLTAGE SUPPORTED PROCESSORS 32037 x 37 PGA3.3vPentium 75-133, Pentium 75+ OverDrive SOCKET 6 SPECIFICATIONS Slot 6 was thought and planed of, however was never ...

...top switch. There is a click and red light blinks but no sound or picture. For some time if I hit the on button 5-6 times it would work but now it does not turn on at all. Set is too heavy to take to ...

...5 minutes. This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can ...

...other ideas? Has anyone had a microprocessor die from overheating? Are there any common failures with the Profile 5.5? Personally I'd try applying some more thermal paste to the top of the

...5 volt regulator. If present and there is no life, then check for oscillatiion of the crystal, might need a CRO to confirm if the mP is working or the clocck signals are present, if data tranfer is ...

...5 speakers or subwoofer. same for all input devices. the denon phone tech(s) and I tried resetting the microprocessor to no results. This is a case where the audio output ic's have failed, you ...

top 5 microprocessor http://www.cpubenchmark.net/common_cpus.html

...Top, and 5 pins across the Bottom. The pins are numbered. They are numbered Even across the Top row. Pins 2, 4, 6, and 8. (There is NO Pin 10. Just a blank spot) They are numbered Odd across the ...

...top of the receiver. With the unit unit off, as you push the power button, you should an immediate click. Within 5-20 seconds, you should hear another. If you hear the second click, the amplifier is ...

...top of my bose where the keys are . I plug it in and it comes on but no sound . Hello, I just saw this question pop up a few minutes ago. If you had spilled a full glass on it, you might not care ...