...toner to the paper, it does this with a heater lamp heating a set of rollers that the paper passes threw after it has printed. Your machine monitors this unit to regelate its temp, your machine is ...
toner that transfers to the envelope prior to printing. At least, that's what I can infer as paper prints from the standard paper tray don't seem to have this problem. This leaves what appears to be a
...toner or ink cartridge for the first time, double-check the instructions to make sure that you installed the cartridge correctly and, for new printers, that you have removed all the pieces of ...
Question about C5150n Led Printer
...toner, printer clean, other things print fine....any ideas??? It says on the website the labels are 56lb (I guess cover weight). The only way the stock will run right (ie) fuse correctly is in the mp ...
540 : y toner sensor error I have an oki c5500. The display is reading 540:y toner sensor error. how can I correct this problem? Hi moneybaggz52: Here is your problem. Symptom: When setting up a brand
...toner/drum assembly and set aside, remove the screw on the smaller back cover and set the cover aside (screw stays captive with the cover) then up near where the toner was there are two clips, one on ...
...toner cartridge, ensuring that it correctly locates into the slots on each side of the printer. 6. Close the top cover and press down to latch it closed. 7. The printer will warm up and commence ...
...toner saturation causes paper to stick to fusers and try to keep leading edge of print blank with no big blobs of colour for the same reason, ensure page sizes are set correctly in driver and machine ...
...Toner Sensor.1 Machine Check Exception A problem has been detected in the printer hardware2 DSI Exception The printers main logic has attempted to look up an invalid address.3 ISI Exception The ...
Question about C9600hdn Laser Printer
...set the [Paper Thickness]. • YES Replace the LED head. Has the problem been corrected? YES END • NO Replace the engine PCB (S2V PWB). Has the problem been corrected? YES END • NO Replace the head ...
Usually answered in minutes!
259 Questions
172 Questions
152 Questions
147 Questions
126 Questions