Questions & Answers for: Brother HL toner level

...level and lift toner unit out leaving drum Open new toner packet Shake new unit remove yellow protection plate Fit into drum unit click down Install whole unit into machine Close top coverThats it ...

...after I've changed the toner. How can I reset this? Try shaking the toner side to side. It reads the toner level with a photo sensor. If there is no toner in the window then it will read

...toner level is measured with a laser, apparently, and when the level is below the height of the beam, you will get a toner low message. But there may be another 30% of your toner in there, so when ...

...toner level window on the toner cartridge itself. This tricks the printer into thinking the cartridge is full of toner since it uses a laser to check the level (really a go/no-go gauge). I did this ...

...Is it a new cartridge? There could still be some toner in the cartridge, but this printer calls to 'add toner' when a specific page count is reached, regardless of the toner level. Don't you love

...a beam to pass through to check toner level. There might be some toner left, for emergency printing block the opening with a piece of small paper and the light should go off for temporarily

...toner level.. you will need to push the level at the left side of the toner... First remove the toner from the printer, and you will be able to see the white level on the left side of the toner.. to ...

does anyone know how to reset the toner levels in an HL3040, i have put new colour toners in and each is still showing empty Hey, I've just figured this out myself. Here is the procedure: 1. Open the ...

...LEVEL IN BROTHER HL 4150CDN? Nice question , I've had identical printer for the last few months, and therefore the one downside I keep running into is that the incontrovertible fact that the toner ...

Why is Brother HL 2042 Toner light blinking? toner light blinks while printing in is progress Check toner level