...the turntable to come on? Lost the manuel. Thanks some platters will not begin to spin until the tonearm is lifted up from the rest and over to where the record is, then it starts spinning. ...
Question about CR248 Turntable
...to work. Can some one please help? unable to follow what is wrong. are you talking about the tonearm or a lever at the power switch? i did the same thing . Take the arm and move it to the
Question about Arlington Stack-O-Matic CR66 Shelf System
...brand new and i'm not sure if i'm doing it correctly. Turntable will not turn You have to lift the tonearm up, and move it to the right slightly. This starts the turntable moving. Sounds like you
Question about CR248 Turntable
...label, making the whole platter turn clockwise when looking down at the record. Mechanically, the tonearm should cue up and pivot in to the record and it should gently drop onto the record. If you ...
...says to take the player apart. Just had this occur to me and after a couple seconds figured it out. Tonearm returns once it hits a certain height on the tonearm guide (the bit that goes up and down ...
have a cr2405b. the tonearm lifts up before last song is over. can tonearm be adjueted? on the underside of the unit there is a screw that allows for swing of the arm. adjusting it takes some time ...
Turntable won't spin, even after switch the tonearm right Turntable won't spin, even after switch the tonearm right Hi, most likely the belt has come off or is stretched. Cheers John. ...
Arm lifts too soon At the tonearm base near platter remove rubber grommet and insert flat blade screw driver. Adjust screw until correct position is found. Keep em spinnin. John. Stylus City
Question about 0187SST Turntable
Can anyone help me with grounding a Crosley Keepsake turntable? I have run a wire down the tonearm, when I touch the end of this wire the hum goes away, I just don't know where to attach it? antique ...
Question about CR49 Traveler Portable Turntable Tan
...still has the same problem but slightly better? I suggest you begin by ensuring the turntable and tonearm are as near perfect as you can. The reproduction of sound from vinyl depends first and ...
Usually answered in minutes!
138 Questions
47 Questions
49 Questions
36 Questions
22 Questions