Questions & Answers for: tiny tech Cars & Trucks

need to see where marks are on the cams and crank of a 2.0 16 valve z /tech mercury mystque had the same problem, the two marks look like tiny little nicks in the edge of the crank shaft pulley

Ad

Question about 1991 Tempo 4 Door

2 Answers

...tech installed a new radio and he did it in front of me .He showed me that to take out the radio ,one should look at the front of the radio ,and then look for a couple of tiny holes in the plastic ...

Ad

Question about 1991 Tempo 4 Door

1 Answer

...tiny spring that attachs to this pink piece ( probably a $0.50 piece of poorly engineered product ) that breaks off. See the following link on how to fix this problem. I drilled a small hole in the ...

...tech key work? The key contains a tiny embedded electronic chip called a transponder. Each transponder has its own unique code--it's the key's 'fingerprint'. When the key is inserted ...

Question about 1995 Thunderbird

1 Answer

...tiny bit of improvment they woked a little bit they didnt even reach half way the windscreen can any one help me here Sounds like the wiper motor has failed. You will need the system tested by a ...

Question about 1996 Accord

1 Answer

...tiny metal shavings and worn fibers from the clutch bands and discs. As the old fluid heats up, it becomes less viscous (thick) and allows the filter to **** up all that trash.  Unfortunately, ...

...some fuses have tiny cracks, use a DMM meter and check them for continuity. and state those things that have power and what dont. that combined, evidence s, makes the failed path clear to any

...As simple as a hole or disconnected boot on a tiny vacuum line can cause all that. Common problem on a GM, I have an 03 pick up with similar problems and a dealer tech friend told me about

...tiny wire ,hint hint) if A/T box the PRNDL is bad. (automatic trans) If M./T box, the clutch switch is bad. (stick shift) if the inputs to 10 and 11 are bad (0v cranking)the key switch is dead. did i ...

on tech 2 i had speedo to the cluster but not to speedo on cluster.please help More than likely the tiny electric motor that moves the speedo needle has failed, very common issue on GM cars and trucks

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...