Questions & Answers for: Hyundai Sonata timming marks

Question about Motor 2003 Sonata

1 Answer

timming belt cover off and set it to tdc to make sure it did not skip time . And noticed the oil pump timing mark is off about 6 teeth all the other marks are dead on . Would this cause it to rattle ?

Ad

Question about Motor 2003 Sonata

1 Answer

i need to know the timing points hi from uk the marks i assume are the timing belt marks ?? to st up turn engine to T D C number 1 cyl fire check the cam cog and view the hole in the cg is at top and ...

Ad

Question about Motor 2003 Sonata

1 Answer

timming belt. They are suppose to put the timing belt on today and set it. If the car dosen't start what could be the problem if jump time that should be it timing marks and the tensioner are to lined

INSTALLED A KNEW TIMING BELT ON MY 2003 HYUNDIA ELANTRA GLS WITH A 2.0 ENG.NEED TO KNOW WHERE ARE THE MARKES FOR THE CAM On the top two camshafts you gonna have to look for a paint mark on the wheel ...

Question about Motor 2003 Sonata

1 Answer

need timing belt marks for 2003 sonata timing belt marks are as follows= crank at TDC marks are at 10 oclock the both cams marks at TDC are at 12 .oclock position marks are clear if you look theoil ...

How long can I expect the timing belt to last on a 2001 Sonata with E 2.4L L4 MPI DOH dngine? The one I am looking at has 113,000 miles. They say 100,000 miles on the timming belt.

No heat in my car, radiator hoses are hot, what could be the problem? may be thermostat, which I would check first, you can remove and see if heat is in car, if so then replace. Hope this helps Tim

Question about 2000 Sonata

1 Answer

Have a hyundai sonata - emissions test gave a code P2187 system too lean at idle bank 1. What could be the problem? could possibly be the o2sensor or cataylic convertor have them checked. Tim.........

i want to know sonata s20 2004 model radiator price around 180.00 TIM.................

timming belt 2005 hyundai sonata If the belt is still in place then position all the timing marks where they are supposed to be first the DO NOT MOVE any PULLEY or CRANH SHAFT. Loose of the tensioners

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...