putting a 03 4cy motor in a 00 dodge neon 2003 motor in a 2000 neon.... the computer controls the timming, if i change the ICM in my 2000 neon to an ICM of an 03 neon would that fix my timming problem
...a burst of air then my car quit and won't start it cranks but wn't startwhat could the problem be TIMMING BELT? CHECK FOR SPARK TO ...
...and not start unless you do head job.only way to know is try and do compression test after timming belt is done but then you will have to take timming off again i would take head off when ...
...timming belt. Have a look at the fuel filter bro. that car doesnt have a maf sensor coil pack is no good check spark sparkplug wires and spark plugs or tell your mechanic to recheck the timing marks ...
Check engine light is on and my car jerks when i accelerate, as well as when i am stopped and the brakes are applied. could be an ignition problem,have the computer scan for the codes. TIM............
Where can I get a front license mount for my 2000 neon? any auto parts store has a universal one,or go to the chrysler dealer. TIM..
What does the battery light mean when it comes on ? there is low/high charge from the eletrical system,probably the alternator,have it checked. TIM..........
At what mileage should I be thinking of changing the timming belt? most manufacturers recommend inspection and or replacement at 60,000 miles.
i changed coil, computer and cam sensor, and it still will not fire it was running grate and just stopped DID YOU CHECK YOUR IGNITION MODULE? TIM
...timming belt but car doesnt start right plus shakes doesnt sound right 2001 neon dodge Sounds like timing belt not on correctly. Check timing marks are aligned correctly when installing timing belt. ...
Usually answered in minutes!
861 Questions
762 Questions
743 Questions
710 Questions
606 Questions
