...timming marks on your cams are off. You got to go back inside your motor. Your ignition timming and your cams got to be timed the same.Are your cams turned the right way ? IS your timming chain set ...
...writing should be facing you so you can see the timming marks. if you have taken the sprocket of the camshaft then you will need to measure the cam lobe the smaller size is the inlet. hope this ...
timing needed some help in setting the cam timing align the cam timming marks with the cylinder and the marks on the magnito with the marks on the case
valve timming which marke on rotor and which cam is exhaust and which is inlet The inlet cam is on the Inlet side whereas the exhaust cam is closest to the exhaust manifold.
...timming marks to make sure you are at the tdc mark it will be the third mark on the fly wheel in the direction rotation of motor or it will have a T mark. Ck to see if the valves keepers are loose or ...
set timming on 220 bayou kawasaki was running fine smoked alot took head and jug off to check piston rings they were fine went to put jug back on and pushed piston down wich turned my crank wich moved
Usually answered in minutes!
239 Questions
197 Questions
175 Questions
157 Questions
126 Questions