Questions & Answers for: Volkswagen Jetta timing marks

Question about Volkswagen Jetta

4 Answers

...be engraved dots on them you have to match these dots up to each other in order for proper aligned timing pulley No there's no marks on crankshaft pully ul find mark on flywheel and gearbox ...

Ad

Timing Marks on VW Jetta GL 1995 2.0 Litres I am trying to find out what should be timing marks look like on my VW Jetta GL 1995 2.0 litres. Could you tell me step by step about timing marks. How to ...

Ad

Question about 2003 Jetta TDI

1 Answer

timing belt no timing mark on cam gear, how to find for 2003 jetta deasel There definitely is a mark. I'm tearing down a 99 Beetle now. The mark is on the center of one of the teeth and runs the ...

Question about 2000 Jetta TDI

1 Answer

timing marks for a vw 2000 jetta vr6 the engine is all takin apart need the timming marks to put it back together well learn how to time engine with no timing marks,its easy .look on end of cams for a

...timing marks,its easy .look on end of cams for a slot or some sort of mark on the cam bearings caps .If you cant find anything then no 1 piston at the top and both valves closed with cam lobes in the ...

Question about 2003 Jetta TDI

1 Answer

timing 1980 vw pickup timing belt went on a 1980 vw gas pickup. cant find a mark on the crank pully or the notch like the book says. is there a different way? You can remove the #1 spark plug and get ...

Question about 1992 Jetta

1 Answer

...flywheel to set the timing. Mark the timing mark with white paint, start the engine, shine the light onto the marks, to adjust, loosen the distributor to turn back or forth to adjust the timing

Question about 1992 Jetta

1 Answer

timing belt marks for 2001 jetta 2.0 Hi, Here is the timing marks for your vehicle Turn engine to cylinder 1. These two marks should ligne up then replace the timing belt. Hope this helped. Jason

...timing marks. On 16 valve engines, the mark on the tooth should align with the mark on the rear belt cover. Install the new timing belt and tension the belt so it can be twisted 90 ° at the ...

...belt and water pump in and can't get this to work. I have the distributer off as well and its lined up to be at TDC also. try it and see .. get a printout of the timing marks from the parts

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...