Questions & Answers for: Chevrolet Cobalt timing cover

Question about 2006 Cobalt

1 Answer

...cover, I got it back on but the tab that tells the wipers where and when to stop was broken. I hear that's a pretty common thing. A service tech will have to reset the timing and/or replace that

Ad

I need to remove the front headrest of a 2008 chevy cobalt lt I need to remove the front headrests in my 2008 chevy cobalt lt in order to put a custom seat cover on! Push the button and pull up on it ...

Ad

air conditioner water leaking onto passenger floormat Its happening and i had the tube checked for blockage, freind and dealer say it is clear and not kinked. Dealer said there is a bulletin out but ...

strong gas smell coming from my cobalt at all times strong gas smell coming from my 2006 Cobalt and it runs really rough all the time. Look in the back of the car. The fuel pump lines like to break. ...

Question about 2006 Cobalt

1 Answer

...TIMING COVER OIL SEAL HAS TO BE REPLACED.BY REMOVING THE TIMING COVER.YOU HAVE TO USE SEAL DRIVER TOOLS.YOU ALSO CAN REMOVE TIMING COVER OIL SEAL WITH THE COVER STILL MOUNTING TO ENGINE.USING A SEAL ...

Question about 2005 Cobalt

1 Answer

2005 Chevy Cobalt lights turn off I have a 2005 Chevy Cobalt. The headlights and dashlights will turn off at times when the lights are on the automatic setting. The radio will loose its time, like the

my dashboard light and my gear light does not work so how do i know if the fuse is broke it happened after a accident Remove the fuse box cover. Look at the diagraham listing on the cover to see which

...timing chain cover, a long flexible magnet should help you retrieve the socket that was dropped. It will take some hunting but it can be done. Worst case is that you are going to have to remove the ...

Question about 2005 Cobalt

1 Answer

I have a 2009 Chevy Cobalt LS standard transmission. The key is stuck in the ignition and the only way to cut the car off is to stall the engine by coming off the clutch and taking off the battery ...

floor jack under the engine, take off front motor mount, take off the crank pulley & anything else thats in the way, take timing cover off, loosen tensioner, keep marks lined up & replace belt

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...