timer correct model # 110.24642300 my washer will not spin on it's own - the motor runs, the knob turns, but it does not spin. it will spin if i turn the knob to spin (i've been doing that for months)
...timer knob is old and need of replacement normally happens due to age as the timer switches inside the timer knob become old and sticky mostly unable to move so the timer isnt able to do much of its ...
...the three cycles where it says rinse and spin on the timer. I have moved the knob to different locations with no luck. Could it be the timer or vacuum break or something else? Thanks!! check lid ...
...Help!? If it has a mechanical timer switch, (the main control knob) that is possibly the culprit. The timer switch is basically the "brain" of this type of washer. I had this problem on a
...pushing and pulling the timer knob. Is this the timer or some other issue? Thanks. Your timer has failed to initiate a pause for the transmission to lock in. Replace your timer. Solve your
...timer knob spins Hi - I have a Kenmore Washer, Series 80 model 110.82980120. The timer knob just spins. I did some research last night, and was able to get the timer knob off, but not the dial/guard ...
...to. Good luck. You need a new timer. The clicking sound is the timer knob going and your washer not "agitating" is the result of the timer knob not sending the signal to the rest of the
Question about WBSR3140DW Top Load Washer
Timer Knob Spins - Knob OK - New Timer Purchased Knob Still Spins Previously posted that timer knob on Kenmore Model 110.82891110 was spinning. The knob is not stripped, and can be tightened on the ...
Question about Whirlpool Washer Timer 3351811 3351811B
...on the control knob causes the spin to start back up. When it stops try wiggling the timer knob if you get it to start most likely have a timer problem not connecting inside the timer. Hope this ...
Question about Whirlpool Washer Timer 3351811 3351811B
...timer knob buzzes, burning smell. The washer stopped working and there was a burning smell. Before that, the timer knob would freeze and buzz for a little while on the normal cycle, then would resume ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions