Questions & Answers for: tighten slow close toilet seat

...tighten the hinges on a slow close toilet seat? I have a close coupled mini toilet with a slow close seat. It appears that to access the seat fastenings and hinges you have to remove hinge covers ...

...tighten the seats so they won't move, I don't think I should have to replace the seats at my expense. Is there any one who can help me with this problem.Again they are Jacuzzi Era Elongated seats. ...

toilet seat does not wont to close only using about a month seat hinges were tightened out of alignment. Loosen platic nuts and tighten snugly, rotate hinges to bein line and tighten

...tighten it. Please help! Its about to come off completely Thanks Usually there are plastic caps that snap down over the bolt head. Shut toilet lid and get down close with a flashlight. Seat attaches ...

slow close toilet seat and one of the pins is broke. I'm also in need of the two nylon sleevs that hold the screws in place on the bowl. Is it possible to purchase these items? One of the pins has

...toilet to refill every few hours. I have lifted the flapper, tightened the two screws holding down the bottom seal but problem persists. Any suggestions? The flapper may be defective or not seating ...

...slow close toilet seat Loose. Needs to be tightened Check the chain the goes between the handle and the flapper. It should not be taught. If it is it will not permit the flapper to seat properly and ...

...tighten the bolts....then reset the seat on bolts then lock down by doing the opposite as you took off... I am getting the sense that one cannot adjust or purchase slow close hinges for the Bemis ...

...slow close - US836401 If the bolts spin and don't tighten, you'll need to use pliers to grip the nut on theunderside of the toilet while turning the top of the bolt with a screwdriver. Tightenuntil ...