it is saying schedule maintance see owners manual The manual should point out specifics but this is usually a message that is generated by the miles on the mill. Most important maintenance on a ...
tighten the belt, start by locating the two bolts that adjust the rear roller (one on each side of the unit in the back). Run the unit at about 3 mph. Tighten the bolts a 1/4 turn at a time. Make sure
The belt seems to slip Tighten the left and right tail roller allen screws clockwise in equal 1/4 increments.repeat until running belt is tensioned properly
frame is cracked I have a star trek 900 , Light institutional 95? I have had since 1997.Still works great but I have noticed that the frame is cracked, the motor needs to be cleaned and checked ,the ...
My Lamar L1400 treadmill stopped working. The display functions properly, but after it countdowns to start, the belt does not move; then the message "lose speed" scrolls across the display. ...
My Lamar L1400 treadmill stopped working. The display functions properly, but after it countdowns to start, the belt does not move; then the message "lose speed" scrolls across the display. ...
Question about Star Trac 4500 Hr Treadmill Remanufactured
Treadmill wont speed up all the way I have a star trac 4500 its about 7 years old. If I enter 4.0 MPH it will speed up to 3.7 slower than normal. Any speed I enter in, it seems to stop accellerating ...
Question about Star Trac 4500 Hr Treadmill Remanufactured
stairmaster quinton 612 plus error code e201 error code is e201. it is a stairmarster quinton 612 plus. lift motor works but belt motor wont work. Quinton Error E201 Probable Cause Grade Over Limit ...
STAR TRAC 3500 SERIES ERROR EL4 IT WAS RUNNING FINE, UNTIL I MOVED THE TREAD MILL. I HAD TO DISMANTLE IT TO GET IT UPSTAIRS. WHEN I PUT THE MACHINE BACK TOGETHER , IT DOES COME ON BUT MAKES A CONSTANT
Question about Star Trac Pro S Treadmill
what could cause the belt not to move on a pro fit treadmill even though all power is there and the motor is fine when tested away from the treadmill? control board it a U-MC 2100E I would check the ...
Usually answered in minutes!
26 Questions
12 Questions