Questions & Answers for: tie slip knot

tie small knot in 1 end of rope. unwind spring pressure like if rope is pulled all the way out when starting.align holes in pulley & cover .fish rope thru holes start on pulley side, out thru cover so

...tie a slip knot against the outside of the housing to hold it in place and reassemble everything. Hook the end of your rope through the rope guide on your handle if it has one, slip the handle on and ...

...Sheets be used in the dryer. I was told by someone they should not be used, but I cannot find anything in the book that says you can't. Yes but tie them in a knot. They can slip past the

...the pullrope and let it pull it in.you might have to cut some off at the handle if its still too long.to do this pull some rope out and tie a quick knot so the rope can't slip back if you let it

tie and then continue underneath. 3. Cross the wide end over the narrow part one more time. 4. Cross the wide end over the narrow part one more time. 5. Hold the knot steady and slip the wide end down

...tie it off with a secure square knot so it can't slip out. Remove the string. You can take it to the auto parts store and have them measure it or you can cut the string at the knot and measure from ...

... slip the new rope in the hole on the metal housing and through the hole in the plastic disk. tie a knot in the end of the rope and push it in the slot. put grip back on and it should be as good as ...

...tie a slipping knot on the line, open the pickup, slip your knot on the reel spool, tighten it, and then reel in. A more efficient way may be to install your reel on the rod, first pass your line ...

...line will not seat itself so it will reel the line in! You mean how to tie a knot around the spool so it won't slip...two double overhand knots... sometimes a SMALL piece of cellophane tape will