Questions & Answers for: Dodge Stratus tie rod

...tie rod issue Well the problem that i'm having is that the driver side lower control arm is hitting the wheel rim when i turn. what could it be? Probably a worn, "ready to let go" lower ball joint. ...

...at the tire. I think the bracket the rear tie rod is bolted to is pulled loose or broken. Can this be welded or replaced? Nothing pulled loose or broken. The upper control arm was warped really

...bent or broken. it will turn to the left as far as it is supposed to, the tie rods are curved and the right is different from the left THEY put on the passenger side tie rod on the drivers side i ...

...tie rod ends for ANY play. The pittman arm is the one on the steering gearbox that connects to the tie rod, and the idler arm is the one that connects from the tie rod to the frame. Replacing the ...

...tie rod. I don't want to break anything but other that removing the original equipment this is a fairly simple job. Looking for any suggestions on how to get the original tie rod removed so i can get ...

...tie rod end on dodge stratus, replacement rod came with slotted nut and cotter pin Hello Welcome! The torque spec for the tyrod ends are 45 foot pounds. â?¢ Unlock the steering wheel before ...

tie rod end Tie rod ends are replaceable, whether the steering system is rack and pinion or parallelogram steering system. Parallelogram steering system mounts. Figure A - behind front suspension; and

how to install outer tie rod on 2005 dodge stratus unbolt it, andr eplace it. get it as close to the same spot as the old one, then have the toe on the front wheels reset (wheel alignment)

how do i get a printable picture of ball joints and tie rod ends for a 2002 dodge stratus. 2.4 DOHC go to 'advance auto parts. com and put your vehicle info in. follow instructions.

...of grinding could be power steering pump if whinning noise if tight on steering check steering rods tie rods and also check cvr joints for front wheel drive also depending on the direction of turning ...