...thumping/rubbbing sound when turning. The drum appears to be mis-aligned with the drive system.It still turns and spins but the sound is constant. How does one re-align this. you have a three armed ...
...GE washer started clicking each quarter roation of the drum. Not a large load, nothing has been out whack at all....any ideas? Try running for a short time with no load, it looks like you have a ...
Question about WBB4500EWW Top Load Washer
whirlpool washer,,,,,top load very noisy 6 years old when I turn on the washer it sound as if the motor is thumping check your belt..cracked
...thumping noise, and depending on how smooth this seam is, depends on the sound level of the noise. Whirlpool and Maytags also use felt drum seals that are attached to their drums. GE and Frigidaire ...
GE front load washer is thumping when the washer basket is at a specific spot in the spin. It sounds as if something is hitting in between the washer basket and the drum at the lowest part. I can turn
...GE-Washer-won-t-spin-WCVH6800J1WW Hope this helps a bit. Hi,I've seen that problem plenty of times. That rubber strip is from the door boot rubbing the inner tub while spinning. First thing you need ...
...GE washer and I will try a solution one of your experts (Macmarkus) provided. So, you're helping already and I hope it works for me. Again, thank you for your help. Matt ALWAYS UNPLUG YOUR DRYER ...
...thumping sound is a sure sign that the spider arms or the support arms that hold the wash drum are broken. It is a very expensive repair since you need to buy a replacement wash drum and spider arm ...
Question about WSXH208A Front Load Washer
thumping or knocking sound. What do you think? I may have fixed it? I replaced the 4 glides: one of the green ones was very thinned out and needed changing. The other 3 (one green, two white still had
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions
