Questions & Answers for: thumb screw Vacuums

...on the actual switch. Sometimes the switches burn up and othertimes the rod that comes from the thumb switch does not push the on/off well enough. It could also be the cord, inspect it for large ...

how do you change the belt for the brushes Turn the vacuum upside down, there should be two thumb release pivot screws. Remove bottom cover, now you have access to the belt. Remove belt that's in ...

...happy to answer any follow up questions. If this was helpful, please rate my repair by clicking the thumbs up icons in the top right hand corner of this repair. Thank you, Chris J. ...

...views might be what you want. If this solution keeps you from being disowned, I would appreciate a Thumbs Up rating from you! Be well and good luck! ...

I need to remove the handle from my Hoover Floormate. How to I do this? These are not directions to specifically remove the handle, I looked for them and could not find them. At this URL you will see ...

...response. We take the time to answer your question. take the time to rate us.Thanks and good luck 4 Thumbs - Very Helpful 3 Thumbs - ...

...that hold the reel onto the bracket. Good luck. Hope this helps. If it does, I'd appreciate a 4 thumbs up. Thanks, Handie ...

Hi there. We have 3 dyson vacuums all 3 don't work. How do I get filters replaced please. If they are the cordless ones there is thumb screw on top twist it to the left and pull up.

thumb bar screw. Place the handle back onto the reel and secure it with the handle screw. Tighten all screws and make sure the spool spins freely. It's always a good idea to consult the manufacturer's