Questions & Answers for: thumb screw Motorcycles

Question about Grand WEGA KDF-60WF655 60" Rear Projection HDTV

1 Answer

...hold the grille on. Underneath the speaker grille is the lamp door (1 more thumb screw). Use a nickel if the thumb screws are too tight, like a screwdriver.. Your owners manual has instructions ...

Ad

Question about Professional Door Lock installation Kit

1 Answer

...thumb turn,the 2 long screw is missing from the front,so the lock jiggles a lot redmaid there should be a small allen screw on the shaft of the thumb turn on the inside. loosen the allen screw, pull ...

Ad

...thumb screw is, you have a stripped thumb screw. This is caused by using the key to install the filter screen and pulls the nut out of the thumb screw. This is why they call it a thumb screw. Finger ...

Question about Grand WEGA KDF-42WE655 42" Rear Projection HDTV

1 Answer

...thumb screw which in turn is also held by another grey plastic panel with four phillips screws. Remove screws and loosen the thumb screw. Remove the grey panels. The lamp is on the left and held by ...

Question about Grand WEGA KDF-42WE655 42" Rear Projection HDTV

1 Answer

...thumb screw in it. Just loosen the thumb screw also then remove the covered plastic. You will now see the bulb. You need to remove the 2 screws then you can now remove the bulb. Just do backwards to ...

Question about 16" Electric Chain Saw

1 Answer

...thumb screw will not stay tight? Who can check this and fix? First thing I would do would be to loosen the thumb screw fully so the chain is as loose as you can get it Next, loosen the chain bar and ...

...thumb screw that holds the snap on foot holder.... and place your foot making sure the needle holder thumb screw holds the lever on the other side.  And tighten the thumb screw to hold on the ...

Question about Zig Zag 727198 Sewing Machine

1 Answer

thumb screw by the needle. Just unscrew it enough to be able to remove the needle by pulling straight down. You may need a small screw driver. HOWEVER, when you take the needle out, by pulling it down

Question about Grand WEGA KDF-42WE655 42" Rear Projection HDTV

1 Answer

thumb screw on each side on the rear of the set that holds the speaker cover on the front of the tv, when they're loose (they won't come out) firmly grasp the speaker cover on one side and pull it off

Question about Grand WEGA KDF-42WE655 42" Rear Projection HDTV

1 Answer

...thumb-screw right where the needle joins the needle mechanism. Loosen the thumb-screw and catch the broken needle when it falls out. Put a new needle in the place occupied by the broken needle. Be ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...