...point. 4. Make sure you have free play in your throttle cable. You should be able to move the thumb lever a fair amount before it starts to open up the carb. 5. It sounds like to me that you ...
...open. All cables move freely, opened throttle position sensor - butterfly valve opens smoothly with thumb throttle but valve does not close all the way even when forced by fingers. Previous articles ...
...to far in not alowing you to press throttle all the way in it should be on your handle bar were the thumb throttle ...
...checked plugs, checked for fuel, checked for spark, and checked for compression by putting my thumb over the hole and felt the same as the right side. any suggestions Hopefully it's just the ...
...accessories- Innovative Ideas to Improve Performance of an ATV with Accessories... Basic rule of thumb. More gas. More air. Extractors and racing exhaust. Bigger fuel pump and lines. Racing ...
Hand and thumb heaters not working correctly. Why? Left one gets hot on all settings. Right one gets only warm and thumb never gets warm Jason, I posted a trouble shooting link that explains how to ...
...not fire on starter fluid. You can check compression by removing the spark plug and pressing your thumb or finger over the hole. When you crank the engine, compression should forcefully push your ...
Usually answered in minutes!
2,486 Questions
30 Questions
29 Questions
19 Questions
17 Questions