Questions & Answers for: Pontiac Montana throttle body

throttle body bolts and disconnect coolant hoses to throttle body. Loosen heater hose pipe and remove heater hose from rear of pipe. Remove radiator hose from thermostat housing. Remove top thermostat

...try cleaning the throttle body - remove the air box from the throttle body spray in cleaner and then work it in with an old toothbrush. I had the same issue with my 2005 and this fixed it right

throttle body, the thermostat is just below the throttle body in the aluminum cast housing. two bolts to remove, one was easy the other was a real $%&^!!. It is behind the exhaust cross over tube.

...throttle body, the thermostat is just below the throttle body in the aluminum cast housing. two bolts to remove. it is located under the trottle body,where the air cleaner attatches to the engine,you ...

...throttle body and can be cleaned by spraying throttle body cleaner through the throttle body and in through the IAC passage way in the throttle body. The IAC is know to get stuck with carbon build up ...

Throttle bodie How do i tighten my throttle cable there is no adjustment on the throttle cable if there is a lot of slack then the cable is bad

...before it stalls? And how long before it starts Clean Throttle body. Dirty throttle body will stall the car at a stop light when idling. If car stalls while driving then you have a bad Crank

...If not radiator hoses, what about heater hoses to and from heater core? You might also have throttle body heater hoses to and from throttle body. My biggest problem is I can't see anything from

how is the idle speeded up on a 2000 pontiac montana 3.4 engine Idle air control valve . Clean throttle body and throttle plate help idling issues also .

throttle body on a 2004 Montana van please? Question edited for clarity. Question moved to model category. There is help and videos. https://www.google.com/search?q=2004+montana+remove+throttle+body .