Questions & Answers for: Mitsubishi Galant throttle body

...on my GDI Mitsubishi Haw can I make it ? Where do I find the spot with carbon which has to be removed and what solvent should I use? throttle body is where you spray it in, get throttle body ...

...throttle-body'. 1. Trace the big intake-air hose to where it ends on top of the engine. This is the throttle -body. 2. Loosen the clamp that's holding the big-intake air hose. Pull off the intake air ...

diagram of throttle body assembly need a diagram of the throttle body assembly please Here is a diagram.

...rubber tube from the air cleaner to the throttle body. Spray a can of throttle body cleaner into the intake manifold and add some injector cleaner to the tank.Also check your pcv valve is not

...throttle body to replace the idle air control (IAC) valve. First, disconnect the negative ground cable from the battery. Then remove the vacuum line and air duct intake. Then disconnect the IAC and ...

...throttle body. Throttle body IAC motor is jammed, see above. Fix is to remove the throttle body and clean it. Dirty air cleaner. Miss at revs... Old plug wires or plugs. Bad distributor coil, will ...

throttle body/ The car is idling low and wont stay running. Also fumes are coming into the car You can use Carb cleaner and a clean cloth. Hi, seafoam works well, but if you are taking it off to clean

...the idlethat need to be addressedIf you have some type of idle air control valveon throttle, try cleaning thatCan Spray Throttle Body with CRC Throttle BodyCleaner, but doubt it will do ...

...throttle body & what does it look like ? ALL Throttle Bodies or throttle control are bolted to the intake manifold Think of it as yesterdays carburater Follow the plastic intake ducting from air ...

...throttle body but still loops when idle and code still present What is the code description ? That is not a Generic Code You only change a throttle body if you need a tacm (motor) & have to buy ...