Questions & Answers for: Canon MultiPASS thickness

Canon Waste Ink Full- How to remove and replace it. I need to find someone to remove the waste ink and replace it with a new one. [email protected] I removed the waste ink basket, they are four ...

...that SOMETHING you (or someone) fed in, had a paper clip, staple, crinkle or some other unnatural thickness on one side of the paper - and it's stuck inside the feed mechanism. I had the same exact ...

...its not a true fix but I had the same issue. I turned off printer and slightly moved the paper thickness lever over a few inches. I turned it back on and the cartridge error was off. I do get a ...

I am unable to print anything at all.It goes through the process. I was trying to print out direction from mapquest . com and the only thing that printed was the numbers but no directions. This is ...

waste ink tank near full Go about half way down this page and it shows you how to fix this problem. It will require you to open up the printer to access the "waste tank" which is actually a thick felt

im just getting a "paper thickness lever position" error. I tried adjusting it as described in the manual, but am still getting the error the thickness of your paper does not match the setting of the ...

...jammed will not reset You probally have a piece of paper blocked by a sensor. Adjust the paper thickness to max manually, remove all cartridges and then try to carefully insert the a letter size ...

the printer is giving me a message to check printer (press resume key) I have already checked for any obstructions or paper jams and need to know how to replace the waste ink tank to see if this is ...

what does it mean when the priinter says waste tank is full Follow the below mentioned steps : 1. Remove the outside case of your printer. 2. The Printer Body on the Base Once the case is off, you'