...the length/width of buttonhole if needed. I would recommend a bit wider buttonhole due to the thickness/puffiness of the fleece. Hope this helps, ...
thread or bobbin tension I have a Pfaff 7570. The thread on the underside is loopy & loose. Do I adjust the bobbin screw or the thread tension? Thank you Thread tension. Beware of adjusting the bobbin
machine stops sewing when I hit a thickness I have a Pfaff (Hobby 4260). I have started having a problem when the needle hits a thickness, it stops sewing and just sits and hums. I have to turn the ...
I am sewing on thick fabric and the machine gives me a message to put the presser foot in the sewing position. It is in the sewing position, so how do i get the message across to the machine that the ...
Question about Tiptronic 2040
...all the things I would have tried. Sry. Sometimes I have problems when the foot won't go over the thickness of the seam fabric that hasn't been trimmed close enough or graded properly. Have you ...
Question about Tiptronic 2040
My Pfaff 2124 isn't sewing right. The bobbin is making the correct stitches but the top thread is not. The top thread is just a straight line that can be pulled out with my hand! What should I do? ...
Question about Tiptronic 2040
I have a pfaff 2030/2040 tiptronic. I have had the timing repaired 3times. Will this be a continuing problem. Is it time to replace my machine? Take it to a different technician. If it is irreparable ...
Question about Tiptronic 2040
Hi, I have a Pfaff Varimatic 6091. I sewed some 'too thick' fabric, and it has 'broken' my top tension unit. i.e. I can no longer set it at all, and when sewing the thread is all loopy. How do I ...
Question about Tiptronic 2040
My Pfaff sewing machine sometimes will not feed the fabric through. It's not due to the feed dog being lowered. What could it be. It doesn't happen all of the time, and it doesn't matter what type of ...
Question about Tiptronic 2040
Model 6110. Dropdown foot is not fully descending. How can I repair? The little lever lifts foot ok but when I try to drop it down on fabric it goes so far then slows right down. If I leave it down ...
Usually answered in minutes!
28 Questions
8 Questions
1 Questions
561 Questions
100 Questions