...that SOMETHING you (or someone) fed in, had a paper clip, staple, crinkle or some other unnatural thickness on one side of the paper - and it's stuck inside the feed mechanism. I had the same exact ...
...its not a true fix but I had the same issue. I turned off printer and slightly moved the paper thickness lever over a few inches. I turned it back on and the cartridge error was off. I do get a ...
Question about MultiPASS MP390 All-In-One InkJet Printer
...thick sludge), grab a new and wet paper towel, and lightly press it against the nozzles. This should start sucking ink through the print head, and you will begin to see four distinct colors (CMYK) ...
im just getting a "paper thickness lever position" error. I tried adjusting it as described in the manual, but am still getting the error the thickness of your paper does not match the setting of the ...
Question about MultiPASS MP390 All-In-One InkJet Printer
...jammed will not reset You probally have a piece of paper blocked by a sensor. Adjust the paper thickness to max manually, remove all cartridges and then try to carefully insert the a letter size ...
Question about MultiPASS MP730 All-In-One InkJet Printer
...paper jams and need to know how to replace the waste ink tank to see if this is stopping it from working. try these steps to fix the problem: Resetting the Waste Ink Volume Counter 1) Enter SERVICE ...
Usually answered in minutes!
427 Questions
315 Questions
121 Questions
111 Questions
109 Questions