Question about EP719 XGA DLP PROJECTOR 2000L 2500:1 CONT DVI-D WITH HDCP Multimedia Projector
too close to heat sources and that the vents are not blocked. then check the fans to see if they are working. if after that it still does that, you may need to change the thermal sensor. it may be bad
...try putting a a small fan next to the excaust vents than see if dies the same thing, if it does it could be than the fan needs to be replaced or the thermal sensor needs to be replaced. hope this ...
...and nothing will turn on. The two lamps just keep flasing what could be causing this? I loked at the lamp and it seems ok but I am not an expert Check Thermal Sensor or Thermal Switch and Check ...
Question about Hd70 Dlp Hd High Definition 720p Home Theater Projector Lamp
...a. Lamp LED Light - Check Lamp - Check Lamp Driver - Check Main Board b. Temp LED Light - Check Thermal Sensor - Check Thermal Switch - Check Fan c. Color Wheel - Check Color Wheel - Check Photo ...
Question about Hd70 Dlp Hd High Definition 720p Home Theater Projector Lamp
...thermal sensor hi when i start the projector power is green and the temp light is red which it says its the thermal sensor where can i get a thermal sensor and how to repair it thx wayne Fixya is not ...
Usually answered in minutes!
148 Questions
97 Questions
97 Questions
61 Questions
52 Questions