Questions & Answers for: Land Rover Discovery thermal relay

cant find fuel relay for 97 LR disco i have read many forums in regards to finding and locating the fuel pump relay, and most all say the same thing ( its the relay with a blue base, underneath the ...

i cannot find the voltage relay on my 1996 laand rover discovery I have been looking for the voltage relay to change it because the back light will not turn on the brake light comes on and the turn ...

...relay thats white in color and covered in rubber I havn't been able to identify yet. all relays and fan control appear to be on the right hand side under the dash or right. Any ideas? This is because ...

Land Rover Discovery TD5 1999. Where is the Fuel Relay Switch Land Rover Discovery TD5 1999. Where is the Fuel Relay switch located In the engine fuse box under the bonnet ,relay is the closest one to

my horn doesn't work anymore on my discovery 04. Do i need a new fuse ? I WOULD CHECK FUSE AND RELAY.IF THEY ARE GOOD.I WOULD REMOVE HORN.HOT WIRE IT.IF IT BLOWS.YOU HAVE GROUND PROBLEM OR YOUR HORN ...

1998 land rover discovery LE automatic transmition:Stopped running turns over but wont start. Getting only 5.06 volts to the fuel pump..not the normal 12 or 13 volts followed by a steady 5 volts. ...

Hi, I have a 1997 Land Rover Disco 4.0L. I don't hear my fuel pump power on when I turn the key. If a fuel pump relay was faulty, then would the pump still sound when I turn the key forward? and also ...

what on the land rover 3.9 (1996) does the 60amp circuit operate, on mine the fused area wiring etc has burnt out. Wether there is a connection, but I now have no heated sceen, no interior lidht and ...

voltage at fuel pump What should the voltage be at the fuel pump? I am only getting about 5 to 6 volts... I have found the fuel pump relay module under the hood next to the fuel vapor canister but I ...

location of starter relay 1995 model year what color is the relay Why do you need to know? Unless there is an immobiliser fitted, there is no relay as such - starting is controlled by the solenoid ...