a grinding noise when printing. I just put in a toner cartridge. Troubleshooting NOTE: Refer to the Testing section in this document for instructions on performing the tests. Turn the printer off, and
Question about Z2300 InkJet Printer
...and plug the power cord back in. The paper should then feed normally. Next, try this printer self-test by following the steps given below: 1. Turn off the printer. 2. Press and hold the power
Question about X1270 All-In-One InkJet Printer
...and plug the power cord back in. The paper should then feed normally. Next, try this printer self-test by following the steps given below: 1. Power the printer off. 2. Press and hold the "Paper
Question about X1270 All-In-One InkJet Printer
...multiple pages or jamming, please follow these instructions (use a regular letter size paper to test after doing the steps given below): Please check to ensure there is nothing obstructing the ...
plug the power cord back in. The paper should then feed normally. Next, try this printer self-test by following the steps given below: 1. Turn the printer ON. 2. Press the down arrow button till
...and plug the power cord back in. The paper should then feed normally. Next, try this printer self-test by following the steps given below: 1 Load plain paper. 2 On the printer control panel, press
...cord back in. The paper should then feed normally. Next, I'd like you to attempt this printer self-test by following the steps given below: 1. Disconnect the power cord from the back of the printer. ...
...OK, that paper is well positioned, and that the guides at the sides of paper sheet are well tight. Test restarting printer and computer, and test on different documents. Eventually test after ...
hl4040cn will not print test page have hl4040cn connected to wifes new windows 8 laptop via usb and it will ot print test page.. suspect paper feed problem...thanks Try doing a machine self test to ...
Question about Officejet 4500 All-in-One Printer G510G
...this document in the order presented. IMPORTANT : Each time you try a solution, try to print a self-test report to determine if the hardware is functioning correctly. To print a self-test report, use ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions