Questions & Answers for: Mitsubishi test lamp

...Test indicates code 34-lamp abnormality? I had another problem kinda the same and emailed ctechnicians.com and they gave the fix. is the fans runing at all ? if not the set will not come on at

...it on for no good reason. Therefore there are low hours on the lamp. The red light came on. No screen. I got a new lamp. Switched out the lamp and it does the same thing. do self test diagnosis ...

...lamp is new and shows no signs of poping. Is there a known problem with this set? Resets don't help. Fans are good and running. Any ideas would be appreciated. SE SEDI-POSSIBLY YOUR SET HAS A LOW 5 ...

...no picture. Not sure what the problem is, the lamp looks ok. Is there any way to test the lamp with a meter to see if it is still good. Please help! www.ctechnicians.com read the self test ...

...test this style of lamp It will show as a open on a test meater so the only way to see if it's the lamp without going and testing ballest voltages and scoping turn on pulses is to replace this spendy ...

...lamp and test it to see if the problem is in the lamp or in the TV. am sure the lamp is fine. first thing replace the lamp thermal sensor if this does not work check the lamp ballast (aka) lamp power ...

...or the Ballast Board Your manual tells you the Median Lamp Life. This means that out of 100 lamps tested at the factory, only 50% of them made it to that many hours of operation. Its a lamp scam to ...

...Caps on the power board appear OK. I did not test them, but visually they show no leakage. Have you replaced the Lamp and Made sure Lamp Fan is running? Mats has Lamps for $99.00 ...

how can i test new projector lamp ordered new lamp medodule but suspect was damaged during shipping They are not possible to test...unless you have another TV that uses the exact same lamp.

...one and now nothing The timer light flashes green for minute then status red. the capacitors all tested fine if the old lamp exploded you may have a bad ballast. I would try another lamp first to ...