Questions & Answers for: Harley Davidson FXSTD - FXSTDI Softail Deuce test ignition coil

test and check cables with an ohmmeter if necessary. 4. Loose connection at the ignition coil or plug between ignition sensor and module. 5. Spark plug cables in bad condition, shorting/leaking, spark

...test and check cables with an ohmmeter if necessary. 3. Faulty main circuit breaker and or connections. 4. Faulty ignition coil and or connections. 5. Faulty spark plug, oil or gas fouled, wrong heat ...

...test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so ...

...Test the field coils, and the brush plate with an ohm-meter for opens, shorts or grounds. 5. Replace brushes if less than 0.438" It is generally cheaper to overhaul-refurbish a starter motor than ...

Test With the ignition coil removed from the motorcycle and the ohmmeter set to the RX1K scale place the ohmmeter leads on the secondary coil windings B (middle terminal) to R (rear secondary terminal

...ignition coil, module, and or sensor. 5. Battery nearly discharged. 6. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken ...