Questions & Answers for: how to test a ballast Cars & Trucks

...test the ballast resister on my 1995 jeep wrangler? I have a multimeter but no manual. I have no power to the fuel pump. The Multimeter has several functions.It test voltages [a/c, d.c. (+ plus, - ...

1996 ford explorer third brake light - is there a way to determine or test if the light is bad or the ballast? this light assemlby with a ballast in it probably only available from ford

...test and replace a HID ballast in headlight on 2006 Mercury Montego. Swap the left head light for the right headlight,if it still does not light up,on the side that you are having problems with,then ...

ballast and it is reading 17,5 volts which seems very high to me. My problem is instead of the bulbs being blue like they should be, they turn brown for a bit then completly turn off. Let me know what

run a wire from the +battery to the +coil and test (no more than 30 seconds) if it works, replace the ballast resistor.ballast should have 12v on one side and 7v on the other side with the ignition on

...Test and Replace Ballast Resistor in Car? http://repairhelpcenter.blogspot.com/2011/12/how-to-test-and-replace-ballast.html ============ These link helped me,thanks.More help is appreciated. When ...

...test for proper volts. Replaced Distributer cap and rotor, new pick up, new plugs, new ECU mounted on air box, tested fusible links, Please help. still no spark and very frustrated. Would like to ...

no voltage at coil xj my jeep doesnt start and i went thru and tested cps, and the other various things it could be. i found out that the wire that plugs into the coil (green/orange) is only getting ...

Is there a way to test the headlight ballast to see if it's working? THERE IS NO BALLAST what ballast their not florescent lights

ballast. You can easily test this by connecting the HID kit directly to the car battery. If the kit works, it is a power issue. To resolve this, you will need a wiring harness. If your car has Daytime