...wrong with it.... Any ideas would be appreciated The letters and number it is printing is the self test print mode. Normally to run the self test you would turn the printer off, then hold down the ...
...Thanks, Rob Roy I had a similar problem ... printer printing receipt just like when printer test conducted. I turned printer off, pressed/held paper feed button, turned on, let test run, then ...
...other numbers and the word FLASH. Then it reads "detecting hardware", then it starts running a self test, then it starts printing a receipt in a very halting manner, and then stops. Any ideas what is ...
Question about (M19755014US1) Magnetic Card Reader
...back to NOS password is 1947. Once in the NOS menu choose number 6 Service Menu then 1 Hardware test then 15 RAM test this will state this terminal will self destruct continue. Hit enter and it ...
...the lid and hold the feed button on the top while you turn the printer on. This will put it in self-test mode and it will keep printing until you turn it off again. Does the self-test printout look ...
I can sell the machine SYSTEM= (Firmware ID) - Press [BACKSPACE] to initiate the destructive memory test. MEMORY TEST MEM WILL BE LOST PRESS FUNC IF OK - Three prompts are displayed to warn you that a
..., disconnect pinpad, reconnect pin pad wait 1 min before turning on power, it will do a pinpad test, see if fails this test if it does call for ...
...you can also press the * key and then comm server, then the icon that looks like tools, then ping test, enter in a yahoo.com using the numbers on the keys then press enter to do a ping test, press ...
Question about VX570 Credit Card Terminal (Dual Comm DCSC) (M25755302NAA)
... I want to make sure is working properly. The best way to be sure the machine is working is to do a test transaction. This may be done with the cooperation of your provider monitoring the test. Just ...
Question about VX570 Credit Card Terminal (Dual Comm DCSC) (M25755302NAA)
My Verifone Toaz show error 40 on side panel and it's not booting stuck on boot app acreen The technician said we need to replace unit, is it hardware failure or reload software will work why not find
Usually answered in minutes!
91 Questions
20 Questions
14 Questions
11 Questions