...in some way please help...... louise make sure the needle is pushed in properly. Also, recheck your tension knobs. If the thread isn't actually pushed into the tension knobs fully, it won't sew. This ...
Question about 2007 Mechanical Sewing Machine
...tension knob seems to be broken - am trying to quilt but the tension bit just flaps about although the knob itelf turns. have tried varying the lower tension, the stitch length, everything but it ...
Question about 1409 Mechanical Sewing Machine
...tension knob came off. I don't know in The thread tension knob came off. I don't know in what order everything goes back on. I've tried alot of different ways but can't get it to work. The tension ...
Question about 1409 Mechanical Sewing Machine
bad don't know where tension knob is hello, The tension knob is located near the front of the sewing machine. It has a dial numbered from 1 to 9. The larger the number, the tighter the tension. Thanks
Question about MO-654DE Mechanical Sewing Machine
how do i fix the tension? i've been playing with the knobs for hours, but the threads are still too loose on the fabric. Try decreasing your stitch width and this should help. Put your tension dials ...
...tension knob should be about 4 or 5, you should be able to pull the bottom thread through on the bobbin with slight resistence, if it is too tight slacken the screw on the bobbin case anti clockwise ...
...tension knob doesn't seem to work. The tension is too tight even when the tension number is one 1 (it should be closer to 3) the tension knob make have gone out, the serger needs to be ...
Question about Sew Precious SWSP2 Mechanical Sewing Machine
...tension control knob parts list. Does anyone have a parts schematic for the thread tension control knob. My daugther was using the machine and the screw must have come off the knob, therefore I have ...
Question about Sew Precious SWSP2 Mechanical Sewing Machine
...have any thread bunching up under the fabric , I now haven't got any tension. I'm not sure how to clean the tension knob. Can anyone help me? try some unwaxed dental floss to clean the tension
Question about Sew Precious SWSP2 Mechanical Sewing Machine
...tension knob for blade adjustment is seized ? . What's the model of your band saw? The problem would be the tension rod itself. Try to clean the knob too. Sometimes dust build up can froze up the ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
