tension knob and it works, Please push the bobbin winder back to the left position and it will release the bobbin winder. Then you should be able to sew. If the needle won't move, you will need to
...knob.... sadly its still not quite right.!? Thanks! Tension on my White sewing machine, Model #1418 is messed up. Lost my temper and took it apart and now I can't get it back together properly. Every ...
Question about 1409 Mechanical Sewing Machine
what numbers are the knobs supposed to be set on? I don't know how to adjust the tension for flannel. Flannel is a light - mid weight fabric. If your tension dial goes to 8 , set your tension between ...
Question about 1409 Mechanical Sewing Machine
...tension knob came off. I don't know in The thread tension knob came off. I don't know in what order everything goes back on. I've tried alot of different ways but can't get it to work. The tension ...
knob (bobbin case) that makes the bobbin tension which lies inside the shuttle if it is too loose. Restricted it with the sheet metals around it so that it shouldn't move so freely up and down or back
Question about W3300 Computerized Sewing Machine
tension knob. Bring the thread into the tension knob area and pick up the loop of the tension wire. Bring the thread back to the next upper thread loop and then down to the needle bar where you thread
Where can I buy a new tension knob for a White machine model 1415? try sewingpartsonline.com or sewforless.com
Question about 2037 Mechanical Sewing Machine
...tension is too tight. I would appreciate any help at all with this problem. The knob on the left is the Pressure Foot pressure dial. Here is what the manual says about it: " This dial regulates how ...
Thread# 4 keeps breaking- help Hi yaylorg104... Loosen up the tensioner knob, you have it adjusted to tightly. Please take time to rate me
Question about Speedylock 1600 Mechanical Sewing Machine
tension knob wire and its sprung it. How do I find the tension knob on a machine that doesnt exist? I’m not sure about that model #. This place has full tension assembly’s and individual check Springs
Usually answered in minutes!
125 Questions
116 Questions
88 Questions
79 Questions
49 Questions