Questions & Answers for: tell oven ignitor bad

Question about JGBP33SEHSS Stainless Steel Gas Kitchen Range

1 Answer

...supposed to glow bright red and the gas comes on and the oven will light. It was easy to tell that it was bad. But to check it I swapped the broiler ignitor with the oven ignitor and the oven

Ad

...on the oven the burner in the broiler does not come on. More than likely a bad ignitor Here is how to tell If the ignitor is glowing it should be VERY bright, if it is dim orange it is weak and

Ad

Question about SF357 Gas Kitchen Range

1 Answer

...ignitor Oven gas doesn't come ouy. Boiler works, ignitor glows Ever though the ignitor glows it may still be bad. The gas valve circuit consists of the main oven control, the igniter and the valve ...

Question about SF357 Gas Kitchen Range

1 Answer

...Oven ignitor lights up (glows) but it appears gas is not coming on, thru oven burner. Could the ignitor be bad even if its lighting up? Is there a signal sent the gas valve, from the ignitor, telling ...

Question about SF357 Gas Kitchen Range

1 Answer

oven JGBS07 EV1WW The way to tell for sure is to take an ohm reading on both and a current reading on the ignitor. The thermostat should read 0 ohms when calling for heat. The ignitor should read some

Question about SF357 Gas Kitchen Range

1 Answer

...oven model #FGB500CGSB that will not light. Ignitor glow stick glows bright orange, but the gas never kicks on. Which part needs to be replaced? Can't tell from any of the diagrams I find. Hi, The ...

Question about SF357 Gas Kitchen Range

1 Answer

...oven light and control panel is still functioning. The top of the range is in good working condition. The range was purchased August 2008. Can you tell me what the problem is? Hi, The ignitor is not ...

Question about SF357 Gas Kitchen Range

1 Answer

...oven on. Can you tell us where the pilot light might be? Thanks! Hi, The ignitor is not working right and is going bad.... have the repair man replace the ignitor, or DIY.... Check out this tip about ...

Question about 30" Dual-Fuel Range, VDSC3054B Dual Fuel Range

1 Answer

oven,i went over,had to change out both ignitors and both burner tubes,the ignitors weren't working correctly and burnt a hole through the tube.so check the ignitors first,if you want to calibrate

Question about Profile Spectra JGBP90 Gas Kitchen Range

1 Answer

...tell when an ignitor is bad if it doesn't glow as the oven is started. I posted some pictures here (I think my answer is #10): Check out this solution to the GE Profile Spectra JGBP90 Gas Kitchen... ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Paul Carew

Level 3 Expert

3808 Answers

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66847 Answers

Are you a Kitchen Ranges Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...