Questions & Answers for: Chevrolet how to tell if gear

...gear? this also would point to the safty switch I just want to tell Tye thank u, I thought is was the safety switch also but after checking into it further, I found out it was only the key that I was ...

...teeth on your ring and pinion. Devide ring gear teeth by pinion teeth this will tell you. Or you can call the parts department at a GM dealer give them your VIN # and they can tell you. Please

...gear ratio for your vehicle? I'm not sure if that is what you mean, but there should be a metal tag under one of the bolts at the pumpkin on the axle that should tell the gearing ratio for that ...

tell rearend info. 2. remove rearend cover , you will see veryis gears count the teeth on the big gear on the left side, write it down,count the teeth on the gear that comes from the drive shaft,write

gear lost. I think it's the wiring going to the trans that supplies voltage to internal selnoids.Need supply voltage diagram for 700R trans change the shift seloids tell them at the part house to give

...gearing into a higher gear to see if the gear cog has gone. if it is auto the sensor that actually tells the gears what to do make have gone, this would mean that what you think you are doing is ...

ratio then you can remove the rear differential cover and spin the wheels by hand to turn the gears and find the number on the carrier gear. The numbers will be what you need to tell what the ratio is

...tell you why, and it better be good. Good luck, and if you have any further questions- just ask! usually this is due to a defective sensor in the encoder motor that tells the transfer case control ...

...went to drive it warmed it up as usual and it will not shift into second gear. mechanic at work tells me it could be the VSS has anyone else had this problem or symptoms any help would be ...

...gear. Can you tell me why it does that? It has been changing out smoothly. It has been changing gears smoothly, but , today, it started feeling like it was bumping whenever it changed gears. Can you ...