My Teac R-H500 tape deck will not play tapes My tape deck powers up fine , the tape draw operates properly but when i try to play a tape or try to rewind or fast forward it just makes a clicking noise
Question about V377 Single Dual Cassette Deck
A 303 cassette deck - the belt has been changed. The feed spool and capstan turn fine. The take up spool does not turn and play stops after 5 sec. Take up spool is fine in fast forward. Help ! This is
Deck plays forward, fast forward and fast reverse O.K., but does not play backwards. I don't have any quick answers as this is a newer deck than when I worked for the company- I would have to see the ...
instructions to replace belts on teac cx650r stereo cassette deck The replacement of belts on any deck requires you to dismount the transport section and take thrust plate off as well as other ...
Question about W-865R Single Cassette Deck
RUBBER DRIVE BELT FOR A360 FOR TEAC CASSETTE DECK Drive belts on tape decks are mostly universal. You only need to measure the diameter of each belt in mm and then enter the result in Google as ...
...deck from the side to see if the flywheel is turning and that the belt is on that flywheel. Lastly make sure the capstan motor is turning.Beyond that a Tech may have to take over from there. I ...
...away from Dual cassettes as they are nothing but junk and you are getting this info from a repair technician of 40 years that has mainly worked on tape deck. I also worked at Teac Factory Service
Repair manual for TEAC R-H500 Cassette Deck? Anyone have the repair manual and schematics for the TEAC R-H500 cassette deck? BTW, the Fixya product description calls this a dual cassette deck--that ...
Question about DUAL CASSETTE A/R 110/220 Single Dual Cassette Deck
...I have been in tape decks repair I have never seen one. You either have to work with an experienced Technician or do it yourself using common sense. Going to college gives you a degree and knowledge ...
No power when plugged in ? Is there a fuse ? The best way to find out is remove the base of the deck. You should see the power supply then. If the deck is main's powered the transformer will be seen. ...
Usually answered in minutes!
60 Questions
50 Questions
33 Questions
30 Questions
29 Questions