...error is telling you that its an internal network providing limited access. go to run cmd then in the dos prompt type in ipconfig /all see your network card's ip address. if its 169.x.x.x then thats ...
Question about WUSB54GSC Compact Wireless-G USB Network Adapter w/ SpeedBooster [WUSB54GSC] (LS-SB54GSC)
...error message that says ' Windows cannot connect to [network], Windows will keep trying...', but only a couple days ago it was working just fine. TCP/IP stack repair options for use with Windows XP ...
useing Linksys wpsm54g with tcp/ip You replied to my question on the print server to use tcp/ip since I am a dummy at this how do you do that? I have the ip address of the print server but when i tell
...error Hi you simply need to open port number : 3074 and 81 on the router with TCP/UDP mode with a defined ip add that you put statically on the XBOX and it will definately connect with the router on ...
...error message. My computer is a compaq presario sr1610nx AMD sempron processor. Realtek RTL8139/810x. Thank you very much for any help. The network card should be configured to obtain a IP address ...
...error and stops. What have I done wrong? For configuration of Linsys Router the disc is not require, you can configure your router through internet explorer. 1. Set you computer TCP / IP on obtain ...
Question about Wireless-G Broadband Router
...set to recive an IP address automatically (http://windows.microsoft.com/en-US/windows-vista/Change-TCP-IP-settings) * Check Device Manager for conflics and errors (specifically under Network
...and then the 'log-files' button. Enable "all" logging-options, and then try again to use VPN. Then, "view" the log-file, to see if any error-messages (or "blocked" TCP/IP packets) have been
Question about Wireless-G Broadband Router
...error that tcp/ip is not enabled for my network. All other devices on my network operate fine wirelessly. Read through this thread. Netizen gives a very good run through - I couldn't do it better. ...
...error. Any ideas. Thanks, Joan Most likely a compatibility issue. The tcp handshake is the initial connection were upon both sides of the connection agree upon speeds and protocol etc. How are you ...
Usually answered in minutes!
3,968 Questions
1,852 Questions
952 Questions
689 Questions
416 Questions