Questions & Answers for: target repeat Computers & Internet

my laptop (192.168.0.113) -- see the sample below: --------------------------- Mar/16/2009 16:58:01 Target IP(192.168.0.1), Target Port(80) Packet Dropped Mar/16/2009 16:58:01 Spoof IP(192.168.0.113),

...target repeat as the target moves ' in samsung d980 how can i solve this problem thanks Hello! Dont worry about it , it's just the calibration wizard.Tap the centre of the target (the cross) with the ...

...target,,,then repeat this lot again till you have the bullet hitting were you point the cross, all you need to do then is move the target back and lower thee point of aim on the scope as it should be ...

My Panasonic PV-GS150 is having an autofocus problem. It will be focused on a target and then will go out of focus and then come back in to focus. It does this repeatably. It used to stay focused on ...

Repeat as the target moves.'' what am i do now? Do It. I'm guessing that you have a Touchscrren phone?In that case , it's aligning the display with the screen.It's a short procedure so complete it and

Using Canoscan Lide 70. When trying to scan receive message "not enough room on target disk" When I reinstall Toolbox it works (for a while, then same repeats). When you scan a picture, you send it to

...with writtings"tap on the center of the target.repeat as the target moves around the screen" i followed it soooo many times but nothing happens :(((((((((((((((((((((( need help to fix this ...

...center of target and hold one second. Repeat as the target moves i did that but it stays on that. I pushed the reset button and it coms back to the same thing and it will not shut off or go to

...off and shoot 5 rnd group if group down and left rotate top turret up side turret counter clockwise a few clicks and repeat until you get on target Also look on YouTube for videos on zeroing ...

...target.repeat as target moves around screen,press escape key to cancel" when i press escape then it hangs and don't work.what should i do? I would press and hold the power key until it completely ...