Questions & Answers for: tape unwinds

...tape unwinds inside after loading when you install the tape, it slowly unwinds inside and coils up inside causing a jam-up You have a sticky pressure roller which can be cleaned with some alochol ...

Can't get tape out. Stopped recording in middle of school play and I was unable to remove tape. Sounds like the tape misfed during the recording and wrapped itself around the fly head and ...

...tape unwinds. Is something on the holder broken because it appears that the geared base isn't connected to anything. Are you sure it is the right lift off tape for your machine or that is securly ...

lost key to my alxus es 400 and need to move car asap your car should have a spare key taped to the steering column under the dash.....so, look for black electrical tape wound up around the steering ...

JVC TD-V661 CASSETTE TAPE DECK UNWINDING HALF WAY Often caused by a belt slipping or a pinch roller that is worn and does not apply enough pressure to the tape.

...unwinds loose tape halfway The tape would play about 1/3rd and then will start unwinding and take up spool does not turn. Your reel drive is lacking due to a bad belt, bad idler tire or even a dead ...

...the Starter. The spring is bent into a U shape at one end and a circle at the other end. It is taped with 2 pieces of red duct tape so it will not wind or unwind. I cannot figure out how this is ...

kenwood dual cassett deck, deck a tape unwinds does not move forward, reverse, etc. Lack of takeup torque. Will need some rubber parts and a Technician to install them.

Why does my deck not play in reverse? The tape spindle does not run when auto reverse engages or the direction is switched. The following spindle drives and the tape starts to unwind from the cassette

When I put a tape in the deck it starts to play, then stops and ejects the tape which is caught in the machine. I'm unable to rewind the tape back into the cassette to remove the tape from the deck. ...