Questions & Answers for: tape kenwood protect

...Kenwood stereo KDC-W3534 now just reads 'PROTECT' constantly when switched on and i don't have the handbook anymore.. Any ideas would be greatly appreciated! Thanks. i had the same problem and i just ...

Kenwood XD V757 System Protected After over 5 years with no malfunction or damage, I can't play my hifi system now because after I turn on the power on the word ''Protect'' appears in the led display ...

...kenwood cd players says protect when i turn on the car and that is all it says and it will not do anything it just says protect You have a shorted speaker wire or a blown speaker. The unit is ...

...protect mode Check your speaker connections, you've got a short. Check for loose tape on any connection. Fairly common problem. If your unit is Code Protected.. Try entering the code first, If you ...

...tape properly and make sure no wires are accidentally touching another wire or piece of wire. Then you are to reset the unit. If "PROTECT" does not disappear, consult your nearest service center. You ...

...Kenwood--please tape offRadio Antenna Trigger Wire: Black/Red, blueLeft Front Speaker Wire (+): Pink, whiteLeft Front Speaker Wire (-): Purple, white/blackRight Front Speaker Wire (+): Light Green, ...

Kenwood KDC-U453 cd receiver displays "PROTECT" on connection and nothing works - any solutions appreciated!!!! All wires appear connected, undamaged and insulated as do speaker wires. Screen displays

...TAPE CODE grand cherokee 4.7 I have a kenwood KDC U353 car stereo and it has gone onto protect mode i have done everything it says in the manual and even taken it out of the car just in case it was ...

kenwood rx 28 when i turn the volume up it turns off indicating PROTECT It sounds like a receiver with a DC leak in the coupling stage or a shorted driver. This should be seen by a Technician as the ...

...tape to insulate the bare wires as needed. If these steps don't work, then the short is inside the receiver. The unit will need to be repaired. Kenwood has the documentation for the KDC-355U here: ...