Questions & Answers for: tap position

Ad

...tap when in the open position. As its a 'plug ****' type of tap (least I think it is) I would have expected to be able to see daylight through it when in the open position, and certainly blow through ...

Ad

Question about 1998 GSX 750 F (Katana)

1 Answer

...ENGINE TO RUN FOR FUEL TAP TO OPEN, WHEN NOT RUNNING FUEL SHOULD ONLY EXIT THE TAP IN PRIME POSITION). REASON FOR FUEL FLOW WHILE NOT RUNING WITH TAP IN ANY POSITION, COULD BE DIAPRAM FAILURE IN

Ad

Question about 1978 XS 650 SE

1 Answer

position on this tap, it is vachume opperated which means no fuel will flow from the tap in either the on or reserve position unles the engine is being turned over, so removing the fuel pipes from the

...your main water supply before you start.Turn tap to on position.Remove spindle.Remove worn washer.Install new washer.Reinstall spindle.Turn tap to the off position.Turn your mains water supply back ...

...tap to on position.Remove tap bonnetRemove spindle.Remove worn washer.Install new washer.Reinstall spindle.Reinstall tap bonnetTurn tap to the off position.Turn your mains water supply back ...

...the wiper stalk down. The wipers will move into the service position.To get out of service position: To move the wipers back, switch on the ignition and tap the wiper stalk down. Bad park position

position when backwashing if the pipe after the tap goes back to the filter then when that tap is on the water is going through the filter the line after that tap goes to a drain then that is backwash

Question about 1999 Passat

2 Answers

...to and tap General. Scroll to and tap Keyboard. Tap the Auto-Correction switch to the ON or OFF position. Tap the Predictive switch to the ON or OFF position. How to turn off predictive text in iOS ...

Question about 1999 Passat

1 Answer

...TAP Shift system is activated when the gear selector is in the Low (L) position and is deactivated in all other positions. If the PCM detects an invalid voltage on the TAP up/TAP down switch signal ...

Does the 1996 cbr 900 have a reserve setting on the fuel tap if the tap is a 3 position tap one position will be reserve

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Electrical Supplies Experts

Gene Haynes

Level 3 Expert

5391 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18520 Answers

Are you an Electrical Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...