Oreck XL My Oreck just turned off in the middle of vacuuming and I smelled a burning smell. I am thinking that if I can take it apart and remove whatever turned it off, it will run again. Your roller ...
my orek has no power it won't turn on the spade connections are loose, take the handle apart and check them Check the top of the handle and make sure the power cord has been pushed all the way in.
oreck 2600 hh dead do not get any power to cleaner? Is there a reset swich? take your handle assy apart. Ive found that frequently the quick disconnect becomes unplugged from the switch. also check ...
...taking things apart and putting them back together again. Hope this works for your Oreck too and it's running again for you soon. I have a SterilAire Commercial Vacuum that wouldn't turn on. When I ...
how do I take oreck apart? 5 screws on bottom plate. Then couple to hold fan housing and motor. Not a bad job just takes a little juggling finesse.
motor wont turn locked up Sounds like something was picked up that should not have been and is now stuck in the fan housing. Lay the vacuum out with the housing bottom side up and take out the 5 ...
no suction i have cleaned ALL the filters in my versavac, and cleared the hold from the bottom and the side, there is something stuck in the middle, and i can't get to it. i've taken out all the ...
...taking it apart was that it must have fallen and the case was not making contact with one of the safety switches. Taking it apart was easy a mix of phillips head screws and torx screws. Took me 15 ...
HowAttach tools? tried to take the machine apart I don't think it takes tools, does it?
Question about XL Ultra Bagged Upright Vacuum
...taking it apart, you can take it to a repair shop and have them look at it. If it has been at least a year since your last tune up and you still have some left, it might not cost you anything to have ...
Usually answered in minutes!
230 Questions
81 Questions
49 Questions
34 Questions
29 Questions