Questions & Answers for: tail lamp

...tail/back up lamp harness connector from the from the body wiring harness. Remove the tail/back up lamp assembly from the rear compartment lid. While supporting the tail/back up lamp assembly, unplug ...

Ad

...TAIL LAMP REPLACEMENT REMOVAL PROCEDURE Open the rear compartment. Remove wingnut and pull back the rear compartment trim panel from the tail lamp. Remove the wingnuts from the tail lamp. Remove the ...

Ad

Tail Lamp: Service and Repair TAIL LAMP REPLACEMENT REMOVAL PROCEDURE 1. Open the rear compartment lid. 2. Remove the rear compartment trim panel (4). 3. Disconnect the tail lamp electrical connectors

Question about 2002 Venture Passanger

2 Answers

...tail lamp and pull the tail lamp from the body. Disconnect the electrical connector from the tail lamp. To install: Connect the electrical connectors. Install the tail lamp and tail lamp mounting ...

Question about 2001 Impala

1 Answer

...Tail Lamp AssemblyRemoval & InstallationTo Remove: Open the rear compartment. If equipped, disconnect the cargo net. Remove the wingnut and pull back the rear compartment trim panel. Remove the ...

Question about 2000 Bravada

1 Answer

...tail lamp assembly to the vehicle. Tail lamp assembly removal Rotate the bulb sockets 1/4turn counter-clockwise in order to remove the bulb sockets from the tail lamp assembly. Remove the bulbs from ...

Question about 1999 Dakota

1 Answer

...tail lamp Lamp by pulling towards the rear to disengage retaining studs Sockets from tail lamp Bulb from socket Tail lamp from cargo box To Install: Install or connect the following: Bulb in socket ...

...tail/back up lamp harness connector from the from the body wiring harness. Remove the tail/back up lamp assembly from the rear compartment lid. While supporting the tail/back up lamp assembly, unplug ...

...tail lights and reverse light Left TAIL/STOP/TURN lamp: WHT/DK GRN TAIL/TURN lamp: WHT/YEL BACK-UP lamp: WHT/LT GRN Right TAIL/STOP/TURN lamp: WHT/YEL TAIL/TURN lamp: WHT/GRY BACK-UP lamp: WHT/LT ...

...TAIL LAMP ASSEMBLY AND /OR BACKUP, SIDEMARKER, STOP, TURN SIGNAL BULB REPLACEMENT REMOVAL PROCEDURE 1. Open the liftgate. 2. Remove the screws from the tail amp. 3. Slide the tail lamp rearward in ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29492 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...