Questions & Answers for: tacoma dash light replacement

Question about 2000 Tacoma PreRunner

2 Answers

...tacoma dash brake light stays on all the time . 2000 toyota tacoma 4X4 2.7 4 cyl. Try turning the parking brake handle and pressing it in. If that does not work then replace the under dash sensor on ...

Ad

...tacoma, no gauge lights come on, how do I fix? You may have pinched a wire in the dash, check the fuse panel, replace the affected fuse, if it blows again immediately you have a wire pinched in the ...

Ad

...tacoma You need to remove the instrument cluster assembly. You have to remove the cover on the steering column, and then the fascia, in front of the cluster. Next, remove the 4 screws that holds the ...

tacoma recently replaced rear axle seal on this side up to then the sensor was not on in my dash after replacing seal the abs light and the brake light is always on in my dash checked for code and got

Question about 2005 Tacoma

1 Answer

...dash blinker interior left dask blinker (blue arrow) 2006 Tacoma not lighting. Bulbs front and rear do flash for turn and hazard. Suspect blown bulb in dash. Is it easily replaced/how? dash, blink ...

...Tacoma....Dash lights flash erraticly and trcuk will not start. This also happens whe truck is running. Dash lights continually blink on dash and hazards. Then it works fine for a few days. Battery ...

Question about 2004 Tacoma

1 Answer

Taillights & Dash lights Both the taillights and dash lights will not work. All the fuses were blown--then replaced. Cannot get the car out of park and the taillights and dash lights still do not ...

tacoma tail lights and dash light not working. Fuses and relays seem good. Replaced under hood fuses and checked tail light relay all seem good. I did find a short in a side marker light and fix it. i

...Tacoma has no low beams and high beams work fine except the indicator light in the dash doent work. fuses arevall good, replaced sealed beams and 1 relay in fuse box under the hood. Ck the relay ...

...Tacoma with have a diagnostic system called OBDII. There will be a port for the OBDII code reader to connect to, under your dash. (Locted by handbrake.) The ODBII code reader will read the stored ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...