Questions & Answers for: swr meter Car Audio & Video

Question about 29 LTD CB Radio

2 Answers

swr meter and then check it.If your getting good radio checks it could be the potentoimeter is dirty . Radio shack sells contact cleaner and lube try cleaning it . That might help Putting your SRF/SWR

Ad

...SWR meter and I need to know how to tune it or do I still need a seperate meter 1) push the button marked S/RF / SWR / CAL to CAL 2) Hold in the button on the mic 3) Turn the SWR CAL knob until the ...

Ad

SWR METER . THE SET IS THE NEW 29LTD BT. ALSO AT TIMES THE ANT LITE COMES ON WHEN TRANSMITTING. IS THIS NORMAL? Always use an external meter to set SWR. If the ant. warning light comes on it indicates

...swr meter on my radio With radio turned on 1. Switch the first switch (S/RF SWR CAL) to CAL setting 2. Key mic up & 3. Turn SWR CAL knob while still keying mic until the needle is on the red CAL ...

not sure how to use the swr meter on my cobra nw The SWR meter connect between your antenna and your rig, So the Out of the rig, goes into the SWR meter, and the antenna plugs into the SWR meter.

...swr meter and i would like to no how to ues it Goto channels 1 20 and 40 and do the following.... this a generic calibrate all swr meters have different buttons different style of meters etc... set ...

Question about 29 LTD CB Radio

1 Answer

...meter. SWR meter calibrations Switch (S/RF SWR CAL) to the CAL position. Push and hold mic button While holding mic button adjust the SWR CAL knob so the meter needle swings to the CAL mark on the ...

SWR meter. Can't use the meter to adjust SWR. No matter what I do the meter stays the same. Sent to factory but they said nothing was wro Have a new cobra 29lx. Everthing works fine except for the

...SWR Meter SWR-2. Can you provide Manual & dimensional drawing for Vanco meter SWR-2? SWR Meter operation is fairly simple. The manual for SWR-3 is here with instructions and schematic. ...

...SWR Meter Not Working: Incorrect SWR calibration or bumping the calibrated knob might cause the SWR meter to malfunction. To check the SWR meter: Turn on the SWR calibrate knob until it keys up all ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...