Questions & Answers for: Lexmark how to switch it from tray 1 to tray 2

...switch back and forth between letter and legal paper when I am trying to print letter then legal in several document I get change tray 1 to plan univ go to printer properties & change the default ...

Ad

Question about T632 Laser Printer

1 Answer

...switch to Tray 2 that contains legal paper. We have to remove the paper from Tray 1 (letter) and put legal paper in. How can we get the printer to switch automatically to Tray 2 during a print job? I ...

Ad

Question about T640 Laser Printer

1 Answer

tray is Plain and one is i.e. Bond paper, it won't switch trays even if the same physical paper is in there. Go through the control panel on the front of the printer, or if it doesn't have one, you'll

Question about T654DTN MONO LASER PRINT Printer

1 Answer

that. If it does...then the tray card has gone bad. Its a little pc board inside the printer with 4 switches that tells the printer what size paper is in the tray. Its a pretty common problem with the

tray 1 but we find no paper!! "Paper jam" error is activated by a switch. Perhaps the switch sensor is the issue. Be sure the sensor is not blocked or out of place. It is usually a small black plastic

...will see, two thick fuser rollers (ones rubber), paper runs threw these then it hits a little black switch (your machine thinks this switch is activated) and then a series(3,4) of small rubber exit ...

Question about T630 Laser Printer

2 Answers

...tray and will be spring loaded. The switch should move freely without binding. Make sure no toner or dust is on the optical sensor assembly. See Diagram for location. If the switch seems OK and the ...

...not change to tray 2). if the trays ARE set correctly, but the printer is still reading it wrong, then there could be something wrong with the sensor ( metal fingers and switch ) inside the

...(usually on the left side) might be bent in. They are usually metal flat springs....they activate switches to detect paper size. Might need to bend them out so they make proper contact with the

...tray 2. its not reading there is any paper in the slot so will not load from this draw. the is a switch that when paper is installed it lifts it to tell printer paper loaded. like any switch they can ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...