Questions & Answers for: Jenn-Air how to switch it from tray 1 to tray 2

from the tray so it will demand more. Using the door switch, fool the unit into thinking it is closed. Observe what you can about what is going on. Take appropriate steps to repair. Watch your fingers

...switch under the left side top / front of the cooktop. The aeration tray has a prong on one end that fits into a hole in the front end of the burner basin and activates the switch which stops the fan ...

...the cavity where the tray sits. Inside that hole is the switch that is out of position. Getting at the switch to adjust its position is not difficult, but you need to remove the upper front ...

...noise you wont hear if fan is going. If it does not click the problem is going to be in the actual switch. I have repaired several with this same problem with the switch but you would probably

will not drain check for a dirty and clogged filter, and make sure pump is running. check float switch at the bottom of the unit and make sure bottom tray is not flooded.

...tray and wait for a day. make sure shutoff arm or switch is on or down (arm down) if it makes ice then the icemaker is ok. if it dont then hold up. if it makes ice then either the water pressure is ...

...it. One day we just closed the door and it wouldn't stop running. One or two of the micro switches have failed, you will need a professional to remedy the

...switch that hovers above the icemaker needs to be in the up most position. This shuts the water valve off to the ice maker. Remove the maker tray and dump the existing ice. When changing the filter, ...

...tray just doesn't move any more? Hi, First of all thank you for your model number. To Answer you question: A - yes it can be replaced but will be hard to locate as this was discontinued. B - maybe if ...